Skip to product information
1 of 1

Frenchic Trim Paint Putty Perfect 500ml

Frenchic Trim Paint Putty Perfect 500ml

Regular price £14.95 GBP
Regular price Sale price £14.95 GBP
Sale Sold out
Tax included.

Tricky to pin down, this pale, grounded neutral is definitely one to add to your list of contenders. Complex with a hint of beige, a touch of green and a soupçon of smoke – it’s a recipe for perfect décor.

• For interior woodwork, radiators and furniture
• Self-priming formula
• High scuff resistance
• UKCA and EN71-3 certification
• Water based with low VOCs

Weight:
500ML - 900 g

Trim Paint - General

  • Water based
  • Suitable for interior use only
  • Chalk and mineral paint formulated for trims, skirting, doors etc. Also suitable for other interior woodwork, powder coated radiators, and all sorts of furniture including laminate
  • UKCA and EN71-3 certified (safe for use on children’s toys) EN71-3:2019+A1:2021 
  • Ingredients: Chalk, Clay, Titanium Dioxide, Resin, Talcum, Preservative
  • Low VOC content and low odour
  • Finish – soft satin sheen
  • Self-sealing - does not require a top coat
  • Self-priming – no primer or undercoat required for any surface except bare metal (in which case use a suitable metal primer)

Coverage

  • A 500ml tin will provide a coat of up to 7m2. For a durable finish, a minimum of 2 coats is required, so your 500ml tin should provide full coverage for 3.5m2 on non-porous surfaces like laminate or metal.
  • Porous, or ‘thirsty’, surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 500ml tin will provide less than 3.5m2 of full coverage. If you apply the paint too thinly, durability may be affected.

Preparation

  • Ensure surfaces are in suitable condition for painting - clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint.
  • Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away! 
  • Take care on opening the tin lid – a Frenchic tin opener is recommended
  • Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use

Application, drying and curing (hardening)

  • Apply with a good quality brush  or roller
  • To allow self-levelling, avoid overworking the paint
  • Allow a minimum of 4 hours between coats (even if the paint feels touch dry)
  • Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete

Clean up and storage

  • Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.
  • Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.
View full details